Page -24-© Audient Ltd
Networking (PC)
Your console should now be connected to your studio
DAW computer and ready for configuration as a HUI
TM
control surface and analogue automation platform.
If you need to exit the AuNet program it will still run in the
systray until you manually quit by right clicking on the icon in
the system tray and select quit.
Setting Up Automatic IP Assign (for use with routers)
If you have more than one device connected to your DAW
computer, you will most likely be using a network router to
talk to all of these devices.
If you have connected
ASP2802 to your DAW
computer via a network router,
you will need to use DHCP to
enable automatic configuration
of IP address, providing fast
and smarter networking.
Ensure that you enable ‘obtain
IP addresses automatically’
in Network Connections >
Local Area Connections >
Internet Protocol TCP/IP
Properties (you should already
know how to do this if you are
running an exisiting network).
To Next Page
Loading...
Need help?
General