Audient ORIA - Page 39

Creating a New Profile
To create a new Profile click the ‘+’ icon found in the top right of the Profiles Panel.
Name your Profile and hit Save. The Profile can be renamed by right clicking on it and
typing in the new name.
Duplicate an Existing Profile
To duplicate an existing Profile, right click on a Profile name in the Profiles Panel, and
select ‘duplicate’. A copy of the Profile will appear below the original Profile.
Rename a Profile
To rename a Profile, right click on the Profile name in the Profile Panel, and select
Rename. A cursor will appear enabling you to edit the text. Type the new name and
press enter when done.
Profiles
Profiles are the heart of the ORIA control philosophy. When we select a Profile, we are
simultaneously selecting the choice of speakers assigned to that Profile alongside all of
the calibration parameters for every channel - all in one button press. This allows you
to quickly switch between Profiles which have been created for dierent monitoring
formats or target modes.
A total of 32 Profiles can be stored on ORIA itself. It is worth noting that although Profiles
are stored directly on ORIA’s hardware, they are controlled using the Profiles Panel or
the Profile button on the front of the unit.
A Profile stores all of the speaker calibration settings, including the EQ curve for every
channel, trim, delay and crossover as well as the overall channel routing.
You can either create new Profiles manually in the ORIA Desktop App or by importing
them from the SoundID Reference for Multichannel app by Sonarworks(™).