What to do if Web Remote cannot be opened from a control device (iPad, tablet) for Audio Technica Music Mixer?
If Web Remote cannot be opened from a control device, check whether the control device is connected to the correct access point. Also, verify that the product and the control device are connected to the same network.
What to do if the buttons on the front panel of my Audio Technica ATDM-0604 Music Mixer don't react?
If the buttons on the front panel do not react, check that the front panel is not locked.
General| Type | Digital Mixer |
|---|---|
| Channels | 6 |
| Mic/Line Inputs | 4 |
| Line Inputs | 2 |
| USB | Yes |
| Ethernet | No |
| Phantom Power | Yes |
| EQ | 3-band |
| SmartMixer Technology | Yes |
| Sampling Rate | 48 kHz |
| Bit Depth | 24-bit |
| Weight | 3.5 lbs |
| Frequency Response | 20 Hz - 20 kHz |
| Connector | XLR, TRS, USB |
Provides crucial warnings and cautions for safe operation and preventing hazards.
Lists essential safety guidelines for using the apparatus.
Guides on how to power on the device and initiate operation.
Explains the procedure for saving current settings as a preset.
Explains how to switch the SmartMixer function on or off.
Introduces the web-based application for remote control of the product.
Provides a general overview of the Web Remote interface and capabilities.
Guides on how to log in to Web Remote as an Operator.
Explains the process for logging into Web Remote as an Administrator.
Details methods for launching the Web Remote interface.
Describes the components and options of the Web Remote login screen.
Provides steps for successfully logging into the Web Remote interface.
Explains how to properly exit the Web Remote session.
Illustrates the Operator screen interface on Windows and Mac platforms.
Shows the Operator screen interface as displayed on iOS and Android devices.
Describes how to view and recall presets on the Operator screen.
Explains the function of the volume adjustment dial for channels.
Explains the persistent header section visible on both Administrator screens.
Refers to the screen for configuring audio input parameters.
Details the status indicators for Audio-Technica LINK, IP remote, and error conditions.
Guides on navigating to and viewing the audio input and output configuration screens.
Explains how to set the input type for channels 5 and 6.
Guides on enabling or disabling phantom power for microphone inputs.
Details how to set the input gain for microphone inputs.
Describes how to invert the input audio phase.
Explains how to activate or deactivate the low-cut filter.
Guides on enabling or disabling the 4-band equalizer for inputs.
Provides instructions for adjusting the 4-band equalizer settings.
Guides on enabling or disabling the Acoustic Echo Canceler.
Guides on setting the input level for each channel.
Explains how to mute or unmute audio channels.
Explains how to adjust the Feedback Suppressor (FBS) and Equalizer settings.
Guides on enabling or disabling the feedback suppressor for channels.
Explains how to turn the equalizer on or off for each channel.
Guides on enabling or disabling the dynamics processing function.
Explains how to configure compressor and limiter settings for dynamics processing.
Guides on enabling or disabling the delay function for channels.
Explains how to set the delay time for audio channels.
Guides on setting the audio output levels for each channel.
Outlines fundamental operations for system settings and maintenance.
Describes the main screen for accessing system configuration options.
Covers general system settings like device name and LINK mode.
Details network configuration options including IP and NTP settings.
Explains how to configure IP addresses and network discovery.
Covers settings for administrator login and operator page permissions.
Explains how to set or reset the administrator login password.
Covers audio-related system settings like gain unit and output flip.
Describes settings that control front panel behavior and features.
Explains how to enable/disable input/output level adjustments on the front panel.
Details how to restrict front panel operations like preset recall and mode changes.
Guides on how to update the product's firmware.
Covers the main menu for system settings and maintenance.
To Next Page
