6
Charging the battery
• Fully charge the battery when using for the first time.
• When the rechargeable battery is running low, the product will beep through the headphones, and an indicator lamp
will flash in red. When these beeps sound, charge the battery.
• It takes about 5 hours to charge the battery fully. (This time may vary depending on usage conditions.)
• While the battery is charging, the product's Bluetooth connection remains disabled and therefore the product cannot
be used.
1. Connect the included USB charging cable (micro USB Type B side) to the battery jack.
• The included USB charging cable is designed for exclusive use with the product. Do not use other cables to
charge the product.
• When inserting the USB charging cable into the USB port or battery jack, check that the jack is facing in the
correct direction before inserting it directly (horizontally).
2. Connect the included USB charging cable (USB Type A side) to the computer to start charging.
• While charging, the indicator lamp lights as follows (it may take several seconds for the indicator lamp to light).
Lit in red : Charging in progress
Off : Charging complete
3. When charging is complete, disconnect the USB charging cable (USB Type-A side) from the computer.
4. Disconnect the USB charging cable (Micro USB Type B) from the battery jack.
• If you charge the product with its power on, it will turn off while the product is charging. After charging is com-
plete, the product turns back on when you remove the included USB charging cable.
USB port
Computer
USB Type A
USB charging cable
(included)
Micro USB Type-B
Battery jack
To Next Page
Loading...
Need help?
General
Weight and Dimensions
