Audio Technica ATH-SR5BT User Manual

English
How
to charge
• Fully charge the battery
when
u~ing
for the first time.
• It
takes about 5 hours to charge the battery
fully. (It varies depending
on
service conditions.)
•
The
8/uetooth®
wireless technology
is
disconnected during charging.
•
The product
is
reset
(via
the reset function) when charging starts.
Battery jack
Computer
USB
chargning
cable (included)
Connect
the
included
USB charging
cable
(the micro USB terminal side)
to
the headphones' battery
jack.
* The
included
USB charging cable
is
specifically designed to charge the product. Data cannot be
transferred to and from a computer.
2
Connect
the
included
USB
charging
cable
(the Type A side)
to
the computer and start charging.
3 During charging, the indicator
lamp
turns on/flashes
as
follows:
Lights
in
red
Charging
Lights
in
blue
Complete
Flashes
in
red
Error*
*
In
case
of
a charging error, disconnect the product from your device and contact your Audio-Technica
dealer.
5

Audio Technica ATH-SR5BT Specifications

Communication Specifications

Bluetooth version	4.1
Bluetooth power class	Class 2
Maximum communication range	10 m
Frequency band	2.402 GHz to 2.480 GHz

Headphones Component

Driver size	45 mm
Output sound pressure level	100 dB/mW
Frequency response	5 to 40, 000 Hz
Impedance	35 ohms

Microphone Component

Type	Electret condenser
Sensitivity	-40 dB (1 V/Pa, at 1 KHz)
Frequency response	50 to 4, 000 Hz

Power and Battery

Power supply	DC 3.7 V lithium polymer battery
Charging time	Approx. 4 hours
Operating time	Approx. 15 hours

Weight and Dimensions

Weight	Approx. 170 g
Operating temperature	5°C to 40°C
Headphones cable length	1.2 m