AudioBahn A6601T - User Manual

Lists recommended fuse sizes for various Audiobahn amplifier models based on their type.

Details the power output in watts for each Audiobahn amplifier model at 4 ohms.

Provides the physical dimensions (Height, Width, Depth) for each Audiobahn amplifier model.

Illustrates the various speaker terminal configurations for different Audiobahn amplifier models.

Explains how to adjust the amplifier's input sensitivity using the gain control for optimal audio performance.

Describes the RCA input jacks used for connecting audio sources to the amplifier.

Details the RCA output jacks for daisy-chaining multiple amplifiers.

Explains the function of the bass boost control and switch for enhancing low frequencies.

Guides on setting the crossover frequencies for different speaker types and configurations.

Instructs on proper chassis grounding for noise reduction and safety.

Details the connection of the positive battery terminal, including fuse recommendations.

Explains the remote turn-on connection for automatically powering the amplifier with the car stereo.

Describes the LPF control for filtering high frequencies, suitable for subwoofers.

Details the HPF control for filtering low frequencies, suitable for mid-high range speakers.

Details the HPF control for filtering frequencies below a set point for the A5100T model.

Explains the sub-sonic filter switch and variable control for ultra-low frequencies.

Describes the crossover control for setting the frequency point between speakers.

Explains how to adjust the phase of the subwoofer for better timing with other drivers.

Provides a switch for 0 or 180-degree phase adjustment for subwoofers.

Details the input mode selection for different channel configurations and speaker setups.

Explains the meaning of the PWR and PROT LED indicators on the amplifier.

Shows the remote control interface for the A5100T model, likely for bass level.

Describes the switch for controlling the amplifier's illumination lamps.

Shows wiring configurations for A1801T (Mono) and A2201T series (Mono/Stereo) amplifiers.

Details the tri-mode wiring configuration for the A2201T amplifier series.

Illustrates wiring diagrams for A4401T, A4601T, and A4801T in 2, 3, and 4 channel modes.

Presents wiring configurations for the A5100T amplifier in Mono, Center, Front, and Rear modes.

Shows wiring for the A6601T amplifier in 3, 4, and 5 channel modes.

Details 6 and 7 channel wiring setups for the A6601T amplifier.

Illustrates 8 and 9 channel wiring configurations for the A6601T amplifier.

Provides a step-by-step guide to setting the amplifier's gain for optimal audio input levels.

Advises on safe installation practices and precautions to prevent damage and ensure proper operation.

States that specifications are subject to change without notice and provides contact information for updates.