AudioBahn A1004DP - User Manual

Important warning about hearing damage from high sound pressure levels.

List of key features of the Audiobahn amplifiers, including circuitry and design elements.

Specifications for the recommended fuse size for each amplifier model.

Physical dimensions (Width x Height x Depth) for each amplifier model.

RMS power output ratings for each amplifier model at specified impedances.

Explanation of the Digital Volt Meter connection and status LED indicators.

Details on adjusting bass boost and setting crossover frequencies (HPF/LPF/FULL).

Guide to adjusting input sensitivity and connecting low-level RCA inputs/outputs.

Explanation of chassis ground, remote turn-on input, and power terminals.

Instructions for connecting speaker wires to the amplifier terminals.

Factors to consider before installation, including expansion, component matching, and wiring.

Recommendations for selecting a mounting location and securing the amplifier for optimal cooling.

Diagrams for Mono, Stereo, and Tri Mode wiring configurations for specific models.

Diagrams for 2, 3, and 4 Channel wiring configurations for specific models.

Diagram for 6 Channel mode and component values for passive crossover.

Procedure for powering on the amplifier and indicator lights.

How to properly set the amplifier's gain for optimal audio levels without distortion.

Crucial safety precautions for drilling, cutting, wiring, and fuse replacement.

Statement regarding specifications subject to change without notice.

Overview of the warranty policy, period, coverage, and notes.

List of items not covered by warranty and how to obtain warranty service.