Need help?Do you have a question about the AudioBahn A1500HCT and is the answer not in the manual?
Lists the key attributes and highlights of the Audiobahn amplifiers.
Details technical parameters such as power output, frequency response, and dimensions.
Describes speaker terminals, chassis ground, and remote turn-on input connections.
Explains input sensitivity, bass boost, and crossover controls for audio tuning.
Details variable filters, phase shift, and line input/output connections.
Explains the meaning of the red, blue, and red+blue LED indicators.
Illustrates the wiring configuration for connecting amplifiers in a bridged mode.
Guide on planning system expansion, component matching, and lead routing.
Instructions on selecting a suitable location for heat dissipation and securing the amplifier.
Procedure for correctly setting the amplifier's input gain and level.
Diagram showing speaker and subwoofer connections for mono operation.
Precautions for installation regarding vehicle layout and wiring.
Statement about specifications being subject to change without notice.
Details Audiobahn's consumer product warranty, coverage, and exclusions.
Instructions on how to obtain warranty service and contact information.
General| Channels | 1 |
|---|---|
| Signal-to-Noise Ratio | >100dB |
| THD at RMS Power | <0.05% |
| Subsonic Filter | 20Hz - 50Hz |
| Peak Power | 1500W |
| Frequency Response | 10Hz - 180Hz |
| Input Sensitivity | 0.2V - 8V |
| Bass Boost | 0 - 18dB |
| Low Pass Crossover | 50Hz - 250Hz |
| Phase Shift | 0 - 180° |
To Next Page
