2 Unpacking the Device
Follow the procedure below for unpacking the carton in which the device is shipped.
To unpack the device:
1. Open the carton and remove the packing materials.
2. Remove the chassis from the carton.
3. Check that there is no equipment damage.
4. Ensure that in addition to the chassis, the package contains the following items:
Two AC power cables.
Four anti-slide bumpers for desktop installation.
Adjustable Rear-Rack Mounting Bracket Kit for mounting the chassis in a 19-inch
rack
Two-meter serial interface cable adaptor.
5. Check, retain and process any documents.
If there are any damaged or missing items, notify your AudioCodes sales representative.
To Next Page
Loading...
