AudioCodes MP-104 Quick Start Installation Guide

Page 6 of 19
AudioCodes™ MP-104 Gateway Quick Start Installation Guide
August 2004
9. Save and close the file as .ini file.
10. Double-click SETUP.EXE in the BootP folder to install the AudioCodes BootP/TFTP
Server application.
11. Double-click bootp.exe (under C:\Program Files\AudioCodes\BootP) to launch the
AudioCodes BootP/TFTP Server program. A reminder message about unpausing the
program after configuring appears. Click OK. The following screen appears.
NOTE: Ensure the AudioCodes BootP/TFTP Server application is the only BootP
server running. If another server is running at the same time, it may cause problems
with the download.
12. Select Preferences from the Edit menu. The following dialog box appears. Select (or
browse to) the directory path, where the four MP-104 configuration files and BootP
files are located, in the Directory text box.

AudioCodes MP-104 Specifications

General

Brand	AudioCodes
Model	MP-104
Category	Gateway
Language	English