AudioCodes Media Pack MP-124 User Manual

Document #: LTRT-65412 September 2009
User's Manual
Version 5.8

AudioCodes Media Pack MP-124 Specifications

General

Model	MP-124
Category	Gateway
Fax Support	T.38, G.711 pass-through
Protocols	SIP, H.323
Voice Codecs	G.711, G.726, G.723.1, G.729A/B
Management	CLI, SNMP
Power Supply	100-240V AC, 50-60Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Humidity	10% to 90% non-condensing
Analog Ports	24 FXS ports
Network Interfaces	2 x 10/100Base-T Ethernet ports

Summary

3 Web-Based Management

3.3 Configuration Tab

3.3.1 Network Settings

Allows configuration of various networking parameters including IP settings, application settings, IP routing table, and QoS settings.

3.3.1.1 Configuring the Multiple Interface Table

Explains how to configure logical network interfaces, each with its own IP address, VLAN ID, name, and application type.

3.3.2 Media Settings

3.3.2.1 Configuring the Voice Settings

3.3.2.2 Configuring the Fax/Modem/CID Settings

3.3.2.3 Configuring the RTP/RTCP Settings

3.3.3 Security Settings

3.3.3.1 Configuring the Web User Accounts

Describes how to set up two Web user accounts (primary and secondary) with assigned user names, passwords, and access levels.

3.3.3.2 Configuring the Web and Telnet Access List

3.3.3.3 Configuring the Firewall Settings

3.3.3.4 Configuring the Certificates

3.3.3.5 Configuring the General Security Settings

3.3.3.6 Configuring the IPSec Table

3.3.3.7 Configuring the IKE Table

3.3.4 Protocol Configuration

3.3.4.2 Protocol Definition

3.3.4.2.1 Configuring SIP General Parameters

3.3.4.3 Proxies, IP Groups, and Registration

3.3.4.3.1 Configuring Proxy and Registration Parameters

Describes configuration of parameters associated with Proxy and Registration.

3.3.4.3.2 Configuring the Proxy Sets Table

3.3.4.3.3 Configuring the IP Groups

3.3.4.3.4 Configuring the Account Table

3.3.4.4 Coders and Profile Definitions

3.3.4.4.1 Configuring Coders

Explains how to configure up to five coders and their attributes for the device.

3.3.4.4.2 Configuring Coder Groups

3.3.4.4.3 Configuring Tel Profile

Allows definition of up to nine Tel Profiles and assigning them to device channels for applying different behaviors.

3.3.4.4.4 Configuring IP Profiles

3.3.4.5 SIP Advanced Parameters

3.3.4.5.1 Configuring Advanced Parameters

Explains how to configure advanced SIP control parameters.

3.3.4.5.2 Configuring Supplementary Services

3.3.4.5.5 Configuring Keypad Features

3.3.4.6 SAS Parameters

3.3.4.6.1 Configuring Stand-Alone Survivability Parameters

Explains how to configure the device's Stand-Alone Survivability (SAS) feature for local backup through the PSTN.

3.3.4.6.2 Configuring the IP2IP Routing Table (SAS)

3.3.4.7 Manipulation Tables

3.3.4.7.1 Configuring the Number Manipulation Tables

Explains the four number manipulation tables for incoming (IP-to-Tel) and outgoing (Tel-to-IP) calls.

3.3.4.8 Routing Tables

3.3.4.8.1 Configuring General Routing Parameters

Explains how to configure the general routing parameters for the device.

3.3.4.8.2 Configuring the Tel to IP Routing Table

3.3.4.8.3 Configuring the IP to Trunk Group Routing Table

3.3.4.8.6 Configuring Reasons for Alternative Routing

3.3.4.9 Endpoint Settings

3.3.4.9.1 Configuring Authentication

Defines user name and password for authenticating each device port.

3.3.4.9.2 Configuring Automatic Dialing

3.3.4.9.4 Configuring Call Forward

3.3.4.9.5 Configuring Caller ID Permissions

3.3.4.9.6 Configuring Call Waiting

3.3.4.10 Configuring Endpoint Phone Numbers

3.3.4.11 Hunt Group

3.3.4.11.1 Configuring Hunt Group Settings

3.3.5 Advanced Applications

3.3.5.1 Configuring Voice Mail Parameters

Describes how to configure voice mail parameters for FXO interfaces.

3.3.5.2 Configuring RADIUS Accounting Parameters

3.3.5.3 Configuring FXO Parameters

3.4 Management Tab

3.4.1 Management Configuration

Covers configuration of device management parameters.

3.4.1.1 Configuring the Management Settings

3.4.1.1.3 Configuring SNMP V3 Users

3.4.1.1.4 Configuring SNMP Trusted Managers

3.4.1.3 Maintenance Actions

3.4.1.3.1 Resetting the Device

Explains how to remotely reset the device, with options to save configuration or perform a graceful shutdown.

3.4.1.3.2 Locking and Unlocking the Device

3.4.1.3.3 Saving Configuration

3.4.2 Software Update

Covers upgrading the device's firmware (cmp file) and loading ini/auxiliary files.

3.4.2.1 Loading Auxiliary Files

3.4.2.1.1 Loading Auxiliary Files using Web Interface

3.4.2.2 Software Upgrade Wizard

3.4.2.3 Backing Up and Restoring Configuration

3.5 Status & Diagnostics Tab

3.5.1 Status & Diagnostics

3.5.1.1 Viewing the Device's Syslog Messages

3.5.1.6 Viewing Active Alarms

3.5.2 Gateway Statistics

Allows monitoring of real-time activity such as IP connectivity, call details, and call statistics.

3.5.2.1 Viewing Call Counters

4 INI File Configuration

4.2 INI File Format

4.2.1 Format Rules

4.2.2 Format of Individual Parameters

4.2.3 Format of ini File Table Parameters

4.3 Modifying an ini File

5 Element Management System (EMS)

5.2 Securing EMS-Device Communication

5.2.1 Configuring IPSec

Details the configuration of the IPSec communication protocol between EMS and the device.

5.2.2 Changing SSH Login Password

5.3 Adding the Device in EMS

5.4 Configuring Basic SIP Parameters

5.5 Configuring Advanced IPSec/IKE Parameters

5.6 Provisioning SRTP Crypto Offered Suites

5.7 Provisioning E911/MLPP Parameters

5.8 Configuring the Device to Operate with SNMPv3

5.8.1 Configuring SNMPv3 using SSH

Provides the procedure for configuring SNMPv3 using SSH.

5.8.2 Configuring EMS to Operate with a Pre-configured SNMPv3 System

5.8.3 Configuring SNMPv3 to Operate with Non-Configured SNMPv3 System

5.9 Resetting the Device

5.10 Upgrading the Device's Software

6 Configuration Parameters Reference

6.1 Networking Parameters

Describes the device's networking parameters.

6.1.1 Ethernet Parameters

6.1.2 Multiple IP Interfaces and VLANs Parameters

10.8.1.1 Overview of Multiple Interface Table

10.8.1.3.4 Quality of Service Parameters

10.8.1.4 Multiple Interface Table Configuration Summary and Guidelines

10.8.1.5 Troubleshooting the Multiple Interface Table

10.8.2 Routing Table

10.8.2.1 Routing Table Overview

10.8.2.2 Routing Table Columns

10.8.3 Setting up the Device

10.8.3.2 Using the ini File

11 SIP Software Package

12 Selected Technical Specifications

12.1 MP-11x Specifications

Lists the main technical specifications of the MP-11x devices.

12.1 MP-11x/FXO Functionality

12.2 MP-124 Specifications