3.3.5.3 Configuring FXO Parameters
The 'FXO Settings' page allows you to configure the device's specific FXO parameters. For
a description of these parameters, refer to “Configuration Parameters Reference” on page
213.
Note: The 'FXO Settings' page is available only for FXO interfaces.
To configure the FXO parameters:
1. Open the 'FXO Settings' page (Configuration tab > Advanced Applications menu >
FXO Settings
Figure 3-92: FXO Settings Page
page item).
2. Configure the parameters as required.
3. Click the Submit
4. To save the changes to flash memory, refer to ''
button to save your changes.
Saving Configuration'' 167 on page .
To Next Page
Loading...
