AudioCodes Media Pack MP-124 - 3.4.2.3 Backing Up and Restoring Configuration

Version 5.8 175 September 2009
SIP User's Manual 3. Web-Based Management
10. Click End Process
11. Enter your login user name and password, and then click
to close the wizard; the 'Enter Network Password' dialog box
appears.
OK
12. Click
; a message box appears
informing you of the new cmp file.
OK
; the Web interface becomes active, reflecting the upgraded device.
3.4.2.3 Backing Up and Restoring Configuration
You can save a copy/backup of the device's current configuration settings (Voice) as an ini
file to a folder on your PC, using the 'Configuration File' page. The saved ini file includes
only parameters that were modified and parameters with other than default values. The
'Configuration File' page also allows you to load an ini file to the device. If the device has
"lost" its configuration, you can restore the device's configuration by loading the previously
saved ini file or by simply loading a newly created ini file.
Note: When loading an ini file using this Web page, parameters not included in the
ini file are reset to default settings.
 To save and restore the ini
1. Open the 'Configuration File' page (
file:
Management tab > Software Update menu >
Configuration File
Figure 3-105: Configuration File Page
).
2. To save theini
a. Click the
file to a folder on your PC, perform the following:
Save INI File
b. Click the
button; the 'File Download' dialog box appears.
Save button, navigate to the folder in which you want to save the ini file
on your PC, and then click Save; the device copies the ini file to the selected
folder.