AudioCodes Media Pack MP-124 - Deleting a Scenario; Figure 3-19: Scenario Loading Message Box; Figure 3-20: Message Box for Confirming Scenario Deletion

Version 5.8 47 September 2009
SIP User's Manual 3. Web-Based Management
3.1.7.6 Deleting a Scenario
You can delete the Scenario by using the Delete Scenario File button, as described in the
procedure below:
 To delete the Scenario:
1. On the Navigation bar, click the Scenarios
Figure 3-19: Scenario Loading Message Box
tab; a message box appears, requesting
you to confirm:
2. Click OK
3. Click the
; the Scenario mode appears in the Navigation tree.
Delete Scenario File
Figure 3-20: Message Box for Confirming Scenario Deletion
button; a message box appears requesting
confirmation for deletion.
4. Click OK ; the Scenario is deleted and the Scenario mode closes.
Note:
• Loading an empty
You can also delete a Scenario using the following alternative methods:
dat file (refer to ''Loading a Scenario to the Device''
46
on
page ).
• Loading an ini file with the ScenarioFileName parameter set to no value
(i.e., ScenarioFileName = "").