Version 5.8 155 September 2009
SIP User's Manual 3. Web-Based Management
3.3.5.2 Configuring RADIUS Accounting Parameters
The 'RADIUS Parameters' page is used for configuring the Remote Authentication Dial In
User Service (RADIUS) accounting parameters. For a description of these parameters,
refer to “Configuration Parameters Reference” on page 213.
To configure the RADIUS parameters:
1. Open the ‘RADIUS Parameters' page (Configuration tab > Advanced Applications
menu > RADIUS Parameters
Figure 3-91: RADIUS Parameters Page
page item).
2. Configure the parameters as required.
3. Click the Submit
4. To save the changes to flash memory, refer to ''
button to save your changes.
Saving Configuration'' 167 on page .
To Next Page
Loading...
