AudioCodes Media Pack MP-124 - Configuring Media Security; Configuring the Hook-Flash Settings; Figure 3-46: Hook-Flash Settings Page; Figure 3-47: Media Security Page

SIP User's Manual 72 Document #: LTRT-65412
MP-11x & MP-124
3.3.2.5 Configuring the Hook-Flash Settings
The 'Hook-Flash Settings' page allows you to configure hook-flash parameters. For a
detailed description of the parameters appearing on this page, refer to “Configuration
Parameters Reference” on page 213.
 To configure the Hook-Flash parameters:
1. Open the 'Hook-Flash Settings' page (Configuration tab > Media Settings menu >
Hook-Flash Settings
Figure 3-46: Hook-Flash Settings Page
page item).
2. Configure the parameters as required.
3. Click the Submit
4. To save the changes to flash memory, refer to ''
button to save your changes.
Saving Configuration'' 167 on page .
3.3.2.6 Configuring Media Security
The 'Media Security' page allows you to configure media security. For a detailed description
of the parameters appearing on this page, refer to “Configuration Parameters Reference”
on page 213.
 To configure media security:
1. Open the 'Media Security' page (Configuration tab > Media Settings menu > Media
Security
Figure 3-47: Media Security Page
page item).
2. Configure the parameters as required.
3. Click the Submit
4. To save the changes to flash memory, refer to ''
button to save your changes.
Saving Configuration'' 167 on page .