AudioCodes Media Pack MP-124 - 2 Configuration Concepts

Version 5.8 23 September 2009
SIP User's Manual 2. Configuration Concepts
2 Configuration Concepts
You can configure the device, using the following management tools:
 The device's HTTP-based Embedded Web Server (Web interface), using any standard
Web browser (described in ''
Web-based Management'' 25 on page ).
 A configuration ini file loaded to the device (refer to ''ini File Configuration''
189
on page
).
 AudioCodes’ Element Management System (refer to Element Management System
(EMS) on page 195
 Simple Network Management Protocol (SNMP) browser software (refer to the
).
Product
Reference Manual ).
Note: To initialize the device by assigning it an IP address, a firmware file (cmp),
and a configuration file (ini file), you can use AudioCodes' BootP/TFTP utility,
which accesses the device using its MAC address (refer to the Product
Reference Manual ).