Version 5.8 71 September 2009
SIP User's Manual 3. Web-Based Management
To configure the RTP/RTCP parameters:
1. Open the 'RTP/RTCP Settings' page (Configuration tab > Media Settings menu >
RTP / RTCP Settings
Figure 3-44: RTP/RTCP Settings Page
page item).
2. Configure the parameters as required.
3. Click the Submit
4. To save the changes to flash memory, refer to ''
button to save your changes.
Saving Configuration'' 167 on page .
3.3.2.4 Configuring the General Media Settings
The 'General Media Settings' page allows you to configure various media parameters. For a
detailed description of the parameters appearing on this page, refer to “Configuration
Parameters Reference” on page 213.
To configure general media parameters:
1. Open the 'General Media Settings' page (Configuration tab > Media Settings menu >
General Media Settings
Figure 3-45: General Media Settings Page
page item).
2. Configure the parameters as required.
3. Click the Submit
4. To save the changes to flash memory, refer to ''
button to save your changes.
Saving Configuration'' 167 on page .
To Next Page
Loading...
