3.3.3.5 Configuring the General Security Settings
The 'General Security Settings' page is used to configure various security features. For a
description of the parameters appearing on this page, refer ''Configuration Parameters
Reference'' on page 213.
To configure the general security parameters:
1. Open the 'General Security Settings' page (Configuration tab > Security Settings
menu > General Security Settings
Figure 3-54: IKE Table Listing Loaded Certificate Files
page item).
2. Configure the parameters as required.
3. Click the Submit
4. To save the changes to flash memory, refer to ''
button to save your changes.
Saving Configuration'' 167 on page .
To Next Page
Loading...
