3.1.4 Navigation Tree
The Navigation tree, located in the Navigation pane, displays the menus (pertaining to the
menu tab selected on the Navigation bar) used for accessing the configuration pages. The
Navigation tree displays a tree-like structure of menus. You can easily drill-down to the
required page item level to open its corresponding page in the Work pane.
The terminology used throughout this manual for referring to the hierarchical structure of
the tree is as follows:
menu
: first level (highest level)
submenu
: second level - contained within a menu.
page item
Figure 3-4: Terminology for Navigation Tree Levels
: last level (lowest level in a menu) - contained within a menu or submenu.
To view menus in the Navigation tree:
On the Navigation bar, select the required tab:
• Configuration (refer to ''Configuration Tab'' 57 on page )
• Management (refer to ''Management Tab'' 156 on page )
• Status & Diagnostics (refer to ''Status & Diagnostics Tab'' 176 on page )
To Next Page
Loading...
