AudioCodes MediaPack 114 User Manual

RingCentral
®
Datasheet | AudioCodes Gateway Configuration Guide
AudioCodes Gateway
Configuration Guide
Provisioning
The Emergency Survivability Failover Configuration is available with AudioCodes’ analog gateways
MediaPack 114 and 118. AudioCodes offers these models with the FXO port necessary for connecting the
analog POTS line.
The AudioCodes analog gateway MediaPack 114 or 118 connects to the POTS line from the telco provider on
its FXO port. The gateway is deployed in the customer LAN granting access to the Polycom VVX phones that
will be using the gateway for emergency survivability. The AudioCodes gateway must be configured either
using a configuration file or using the gateway’s element manager.
The details of the AudioCodes MediaPack gateways are available here.
Gateway configuration
The gateway must be configured manually by loading a prepared configuration file on the gateway’s element
manager or configured directly using the element manager GUI.
These are the steps for configuring the MediaPack 114 Gateway using the element manager GUI. Similar
steps are applicable for MediaPack 118.

AudioCodes MediaPack 114 Specifications

General

Number of FXS Ports	4
Number of FXO Ports	0
Protocols Supported	SIP, H.323
Fax Support	T.38, G.711 pass-through
Humidity	10% to 90% non-condensing
Product Type	VoIP Gateway
Network Interface	Ethernet
Voice Codec Support	G.711, G.729, G.723.1, G.726
Operating Temperature	0°C to 40°C

Summary

Provisioning

Analog Gateway Models for Emergency Survivability

Details AudioCodes analog gateways MediaPack 114/118 connection to POTS lines for emergency survivability.

Gateway Configuration

Manual Gateway Configuration Methods

Outlines manual gateway configuration via configuration file or element manager GUI.

Data Required for Configuration

Essential IP Addresses and Phone Numbers

Lists required data: gateway IP, phone IP addresses, and external FXO line number.

Configuring AudioCodes MP114

Select 'Full' Configuration Mode

Instructs to select the 'Full' configuration option within the gateway interface.

Modify Web User Account Passwords

Guides users to change Admin and User passwords in the Web User Accounts section.

IP Interfaces Table Configuration

Setting Inside Interface Addressing

Configuring IP Interfaces Table, setting Index 0 for inside interface addressing.

Endpoint Phone Number Configuration

FXO Line Number and Channel Assignment

Setting the FXO line phone number and channel assignment for the FXO port.

Tel to IP Routing Setup

Incoming Call Routing and Forking

Configuring Tel to IP Routing for incoming calls on FXO line, including forking group.

IP to Hunt Group Routing

Restricting Outbound Calls to 911

Setting up IP to Hunt Group Routing, restricting outbound calls to 911.

Automatic Dialing Configuration

FXO Port Auto-Dialing on Incoming Calls

Configuring Automatic Dialing for FXO ports to enable auto-dialing on incoming calls.

Stand Alone Survivability (SAS) Configuration

SAS Configuration with Port 5070

Configuring Stand Alone Survivability (SAS) using port 5070.