Need help?Do you have a question about the AudioCodes MediaPack 124 and is the answer not in the manual?
General| Brand | AudioCodes |
|---|---|
| Model | MediaPack 124 |
| Category | Gateway |
| Language | English |
Specifies physical dimensions, weight, and environmental operating conditions for the device.
Describes the front panel components, including the reset button and status LEDs.
Details the ports and connectors on the rear panel for different MP-124 models.
Instructions for placing the device on a flat surface for operation.
Steps for installing the device into a standard 19-inch equipment rack.
Detailed procedures for grounding and surge protection for MP-124 Rev. D.
Detailed procedures for grounding and surge protection for MP-124 Rev. E.
Guide to connecting the device to the Ethernet network using an RJ-45 cable.
Connect FXS analog equipment using AudioCodes FXS Patch Panel.
Connect FXS analog equipment directly to the MDF.
Procedure for securing Telco cables using a Velcro strap.
Connect FXS analog equipment using a Mini Patch Panel.
Connect MP-124 Rev. D to a PC for serial RS-232 communication.
Connect MP-124 Rev. E to a PC for serial RS-232 communication.
Connect the device to an AC power outlet for operation.
Connect the MP-124 Rev. D to a 48-VDC power supply.
To Next Page
