Need help?Do you have a question about the AudioCodes MediaPack Series and is the answer not in the manual?
General| Series | MediaPack |
|---|---|
| Category | Gateway |
| Humidity | 10% to 90% non-condensing |
| VoIP Protocols | SIP, MGCP, H.323 |
| Voice Codecs | G.711, G.723.1, G.726 |
| Fax Support | T.38 |
| Management | Web-based, SNMP |
| Security | TLS, SRTP, HTTPS, SSH |
| Operating Temperature | 0°C |
| Network Interfaces | 10/100/1000 Ethernet, optional SFP |
Essential precautions for safe operation of the DECT phone, including battery handling and environmental considerations.
Steps to set up the handset, including removing the battery sheath and attaching the handset cradle to the base unit.
Process to pair the handset with the MediaPack base unit to enable communication.
Instructions on placing the handset in the charging cradle to ensure it powers up.
How to interpret the battery icon on the handset screen to gauge the current charge level.
Procedure for opening the battery compartment and replacing the handset batteries.
How to change the language displayed on the handset screen using menu options.
Describes status icons, signal strength indicators, and navigation keys on the handset screen.
Describes icons indicating call status, ringing, intercom, and hands-free modes.
Details the icons and functions available in the main menu of the handset.
Describes two methods: Pre-Dialing (enter number then dial) and Direct Dialing (take line then enter number).
Dial contacts from the stored phonebook by navigating through entries.
Dial numbers from previously received or missed calls stored in the Call List.
Make a new call while on an active call, placing the first call on hold.
Dial numbers previously dialed from the Redial List.
Respond to incoming calls by pressing a key or picking up the handset.
Manage a second incoming call while already on a call by answering or rejecting.
Terminate an active call by pressing a key or placing the handset on the cradle.
Control earpiece and hands-free volume levels during an active conversation.
Temporarily disable the handset's microphone during a call.
Silence audible notifications for incoming calls.
Switch to hands-free operation using the built-in speaker during a call.
Prevent accidental button presses by locking and unlocking the keypad.
Locate a misplaced handset by triggering a ring from the base unit.
Access, manage, and use the list of recently dialed numbers.
Add a number from the Redial List to the phonebook for easier future access.
Remove individual entries from the Redial List.
Clear all numbers from the Redial List at once.
Manage calls and features involving multiple registered handsets.
Initiate internal calls between registered handsets for direct communication.
Move an ongoing external call from one handset to another.
Set up a conference call connecting two handsets and one external line.
Set up a conference call connecting one handset with two external lines.
Add new entries with names and numbers to the handset's phonebook.
To Next Page
