EasyManua.ls Logo

AudioCodes MediaPack 5 Series

AudioCodes MediaPack 5 Series
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MediaPack 524 & 5 32 Hardware I nstallation Man ual
Hardware Installation Manual
AudioCodes MediaPack 5xx Analog Voice Gateway Series
MediaPack 524 (MP-524)
MediaPack 532 (MP-532)
Question and Answer IconNeed help?

Do you have a question about the AudioCodes MediaPack 5 Series and is the answer not in the manual?

AudioCodes MediaPack 5 Series Specifications

General IconGeneral
BrandAudioCodes
ModelMediaPack 5 Series
CategoryGateway
LanguageEnglish

Summary

Document Notices and Information

General Notes and Warnings

Important general notes and warnings for device installation and operation.

Safety Precautions

Critical safety measures to prevent damage and ensure user safety during installation and use.

Introduction

Unpacking the Device

Physical Description

Physical Dimensions and Operating Environment

Details physical dimensions and environmental operating conditions for the device.

Front Panel LEDs and Ports

Describes the front panel layout, including Power, Status, AC, DC, FXS, and LAN LEDs.

Rear Panel Description and WAN LEDs

Details the rear panel components and explains the WAN port LED status indicators.

Mounting the Device

Desktop and Shelf Mounting

Instructions for placing the device on a desktop or shelf using anti-slide bumpers.

19-Inch Rack Mounting

Step-by-step guide for mounting the device in a standard 19-inch rack, including bracket usage.

Cabling the Device

Grounding and Surge Protection

Essential grounding procedures and surge protection for safe operation and lightning protection.

Connecting LAN and WAN Interfaces

Instructions for connecting the device to IP networks (LAN) and external networks (WAN) via Ethernet.

Connecting FXS Analog Interfaces

Guides for connecting analog telephones using 50-Pin D-Sub connectors and various cable types.

Connecting a USB Device

How to connect external USB storage devices for saving network captures and firmware updates.

Connecting Serial Interface

Procedure for establishing a serial connection for command-line interface (CLI) access.

Connecting Power

Steps for connecting the device to AC and DC power sources, including safety precautions.

Related product manuals