26
Paging your Handset
You can locate the handset by paging the handset from
the base.
To page the handset: On the base unit, press on
(less than two seconds) the DECT button; the LED
changes to orange and all handsets registered to
the base ring for up to 60 seconds and "Incoming
Call HS LOCATOR" is displayed on the LCD.
To stop the paging: Press any key on the handset,
except the Silent softkey.
Redial List
The Redial List displays up to a 100 of the last dialed
numbers. If the number that you called also appears in
the phonebook, then the contact name is displayed
instead of the number.
The Redial List allows you to do the following:
Add a listed number to the phonebook
Delete all entries in the Redial List