AudioCodes MediaPack Series User Manual

11
Charging the Handset
Ensure that the MediaPack is connected to power.
Place the handset in the charging cradle of the base
unit so that the bottom of the phone sits in the base
cradle. When correctly inserted in the cradle, the
phone begins charging, indicated by the display of the
charging levels of the battery icon on the phone's
screen.
Checking the Battery Level
The battery icon located in the main screen, displays
the current battery level, as shown below:
Handset battery is fully charged
Handset battery is two-thirds charged
Handset battery is one-third charged
Handset battery is empty and needs charging
(this icon flashes)

AudioCodes MediaPack Series Specifications

General

Series	MediaPack
Category	Gateway
Humidity	10% to 90% non-condensing
VoIP Protocols	SIP, MGCP, H.323
Voice Codecs	G.711, G.723.1, G.726
Fax Support	T.38
Management	Web-based, SNMP
Security	TLS, SRTP, HTTPS, SSH
Operating Temperature	0°C
Network Interfaces	10/100/1000 Ethernet, optional SFP