AudioCodes MediaPack Series User Manual

14
Setting the Display Language
You can change the display language of your handset.
1. In idle state, press the Menu softkey.
2. Press the navigation keys to scroll to the
HS Settings icon, and then press the Select
softkey.
3. Press the navigation keys to choose the
Language option, and then press the Select
softkey.
4. Press the navigation keys to choose the desired
language, and then press the Select softkey; the
saved message is displayed in the chosen language
and the display is changed accordingly.

AudioCodes MediaPack Series Specifications

General

Series	MediaPack
Category	Gateway
Humidity	10% to 90% non-condensing
VoIP Protocols	SIP, MGCP, H.323
Voice Codecs	G.711, G.723.1, G.726
Fax Support	T.38
Management	Web-based, SNMP
Security	TLS, SRTP, HTTPS, SSH
Operating Temperature	0°C
Network Interfaces	10/100/1000 Ethernet, optional SFP