AudioCodes Media Pack MP-124 - 3.5.1.6 Viewing Active Alarms; 3.5.2 Gateway Statistics

Version 5.8 181 September 2009
SIP User's Manual 3. Web-Based Management
3.5.1.6 Viewing Active Alarms
The 'Active Alarms' page displays a list of currently active alarms. You can also access this
page from the 'Home' page (refer to ''Using the Home Page'' on page 54).
 To view the list of alarms:
 Open the 'Active Alarms’ page (Status & Diagnostics tab > Status & Diagnostics
menu > Active Alarms page item)
Figure 3-110: Active Alarms Page
.
For each alarm, the following information is provided:
 Severity:
• Critical - alarm displayed in red
severity level of the alarm:
• Major - alarm displayed in orange
• Minor - alarm displayed in yellow
 Source:

unit from which the alarm was raised
Description:

brief explanation of the alarm
Date:
date and time that the alarm was generated
3.5.2 Gateway Statistics
The Gateway Statistics menu allows you to monitor real-time activity such as IP
connectivity information, call details and call statistics, including the number of call
attempts, failed calls, fax calls, etc. This menu includes the following page items:
 IP to Tel Calls Count (refer to ''Viewing Call Counters'' 182 on page )
 Tel to IP Calls Count (refer to ''Viewing Call Counters'' 182 on page )
 Call Routing Status (refer to ''Viewing Call Routing Status'' 184 on page )


Registration Status (refer to “Viewing Registration Status” on page 184)
 IP Connectivity (refer to ''
SAS/SBC Registered Users (refer to “Viewing SAS/SBC Registered Users” on page
185)
Viewing IP Connectivity'' 186 on page )
Note: The Web pages pertaining to the Gateway Statistics menu do not refresh
automatically. To view updated information, close the relevant page and then
re-access it.