AudioCodes Media Pack MP-124 - 3.3.4.8 Routing Tables; 3.3.4.8.1 Configuring General Routing Parameters

SIP User's Manual 130 Document #: LTRT-65412
MP-11x & MP-124
3.3.4.8 Routing Tables
The Routing Tables submenu allows you to configure call routing rules. This submenu
includes the following page items:
 Routing General Parameters (refer to ''Configuring Routing General Parameters''
130
on
page )
 Tel to IP Routing (refer to ''Configuring the Tel to IP Routing Table'' 131 on page )
 IP to Trunk Group Routing (refer to ''Configuring the IP to Trunk Group Routing''
135
on
page )
 Internal DNS Table (refer to ''Configuring the Internal DNS Table'' 138 on page )
 Internal SRV Table (refer to ''Configuring the Internal SRV Table'' 139 on page )
 Alternative Routing (refer to ''Configuring Reasons for Alternative Routing''
140
on page
)
3.3.4.8.1 Configuring General Routing Parameters
The 'Routing General Parameters' page allows you to configure the general routing
parameters. For a description of these parameters, refer to “Configuration Parameters
Reference” on page 213.
 To configure the general routing parameters:
1. Open the 'Routing General Parameters' page (Configuration tab > Protocol
Configuration menu > Routing Tables submenu > Routing General Parameters
Figure 3-76: Routing General Parameters Page
page item).
2. Configure the parameters as required.
3. Click the Submit
4. To save the changes to flash memory, refer to ''
button to save your changes.
Saving Configuration'' 167 on page .