AudioCodes Media Pack MP-124 - 3.3.4.2 Protocol Definition; 3.3.4.2.1 Configuring SIP General Parameters

SIP User's Manual 92 Document #: LTRT-65412
MP-11x & MP-124
3.3.4.2 Protocol Definition
The Protocol Definition submenu allows you to configure the main SIP protocol
parameters. This submenu contains the following page items:
 SIP General Parameters (refer to ''SIP General Parameters'' 92 on page )
 DTMF & Dialing (refer to ''DTMF & Dialing Parameters'' 93 on page )
3.3.4.2.1 Configuring SIP General Parameters
The 'SIP General Parameters' page is used to configure general SIP parameters. For a
description of the parameters appearing on this page, refer to “Configuration Parameters
Reference” on page 213.
 To configure the general SIP protocol parameters:
1. Open the 'SIP General Parameters' page (Configuration tab > Protocol
Configuration menu > Protocol Definition submenu > SIP General Parameters
Figure 3-58: SIP General Parameters Page
page item).