Version 5.8 119 September 2009
SIP User's Manual 3. Web-Based Management
To configure the keypad features
1. Open the 'Keypad Features' page (Configuration tab > Protocol Configuration
menu > SIP Advanced Parameters submenu > Keypad Features
Figure 3-71: Keypad Features Page
page item).
2. Configure the keypad features as required. For a description of these parameters,
refer to “Configuration Parameters Reference” on page 213.
3. Click the Submit
4. To save the changes to the flash memory, refer to ''
button to save your changes.
Saving Configuration''
167
on page
.
To Next Page
Loading...
