2. Configure the parameters as required.
3. Click the Submit
4. To save the changes to flash memory, refer to ''
button to save your changes.
Saving Configuration'' 167 on page .
3.3.4.5.2 Configuring Supplementary Services
The 'Supplementary Services' page is used to configure parameters that are associated
with supplementary services. For a description of the parameters appearing on this page,
refer to “Configuration Parameters Reference” on page 213. For an overview on
supplementary services, refer to ''Working with Supplementary Services'' on page 422.
To configure the supplementary services' parameters:
1. Open the 'Supplementary Services' page (Configuration tab > Protocol
Configuration menu > SIP Advanced Parameters submenu > Supplementary
Services page item).
To Next Page
Loading...
