Page | 3
Mounting RXV81 on top of the TV display:
RXV81 can be mounted on top of the TV display using a camera clip bracket (purchased separately).
1. Attach camera clip bracket to
RXV81 bottom with D-Ring
Hinged screw (supplied).
2. Open camera clip bracket and
place it on top of TV display.
Make sure it's firmly
attached.
To avoid accidents, if you need to move the TV display, always remove RXV81 first to prevent
it from falling off the TV display. In addition, refrain from pushing RXV81 from the back to the
front as it may dislodge. Make sure precautions are taken to maintain safety.
5. Cabling
RXV81 connector ports are located on the rear panel:
Connect this port to a TV screen / monitor with the supplied HDMI Out cable.
Power on / Reset button. To restart RXV81, press and hold for at least two seconds.
USB type-A port to connect to touch-capable room display.
Ethernet LAN GbE port to connect RJ-45 terminals.
To Next Page
Loading...
Need help?
General
