EasyManuals Logo

AudioEngine B1 Manual

AudioEngine B1
10 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
3) Check to make sure your source device is running the most up to date version of software available. If an update
is available, make sure you restart your device after the update is installed.
4) Try disconnecting from, and “forgetting” the B1 through your source’s Bluetooth settings. Then, try re-pairing and
connecting to the B1. If your B1 is already connected to a device, then the LED will be on and solid. If your B1 has
been idle (and not connected to a device) for more than two minutes, the LED will be off. Tap the LED and it will
begin blinking to indicate it is ready to pair, then select the B1 in the Bluetooth settings of your source device. If your
B1’s LED indicator doesn’t light up, try using a different power source, and/or micro USB cable (many Android
smartphones use the same connection, so your charger may be a good way to test for this).
5) Try using a different source device with your B1 to see if the issue follows. Try using the analog as well as the
digital optical output, to see if you have this issue with both connections.
6) If at all possible, try your B1 in a different location and / or setup to see if something is causing interference in the
current location. Something as simple as a router, cordless / mobile phone, halogen lamps, etc. near the speakers
may be causing the issue in your setup.
Downloads
Audioengine B1 Bluetooth Music Receiver Manual – Download
Related Manuals:
1. Audioengine A1 Home Music System W/ Bluetooth Aptx Manual Audioengine ONE User Manual Premium Wireless
Speaker System Welcome to...
2. Audioengine A2+ Home Music System W/ Bluetooth Aptx Manual Audioengine 2+ Wireless Premium Powered
Speakers Welcome to the Audioengine...
3. Audioengine A5+ Home Music System W/ Bluetooth Aptx-Hd Manual Audioengine A5+ Wireless Premium Powered
Speakers Welcome to the Audioengine...
4. Audioengine B-Fi Multiroom Music Streamer Manual Audioengine B-Fi Multiroom Music Streamer Welcome to the
Audioengine family...
5. audioengine 512 bluetooth speaker user manual 512 Quick Setup Power ON/OFF To turn on your 512,...
6. Mpow Bluetooth Music Receiver User Manual USER MANUAL Mpow Bluetooth Music Receiver Specifications: B1uetooth
Version: V4.0...

Other manuals for AudioEngine B1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioEngine B1 and is the answer not in the manual?

AudioEngine B1 Specifications

General IconGeneral
Bluetooth CodecsaptX HD, aptX, AAC, SBC
Output Voltage2.0V RMS
THD+N<0.02%
Frequency Response10Hz-20kHz (+/-0.5dB)
TypeBluetooth Receiver
Bluetooth Version5.0
OutputsRCA
Signal to Noise Ratio100dB
Power Supply5V USB
Dimensions3.5 x 3.5 x 1 inches