B1 will automatically go into pair mode and the Pair button on the Bt front panel should be flashing.
Step 3: On your device, turn on Bluetooth and go to Bluetooth preferences.
Step 4: Select Audloengine B1 to pair and connect. The Pair indicator on the B1 front panel should be solid.
Step 5: Play your music and adjust volume levels.
Repeat Steps 3 thru 5. add additional devices. B1 can connect to only one device at a time, however it will remember
up to sit devices.
To disconnent B1 from a paired device and put B1 back into pair mode, press and hold the Pair button until the
indicator begins flashing.
Troubleshooting Tips
B1 is connected but the Pair button does not light up.
Veri4that the B1 power adapter is connected to the Bl and plugged into a functioning AC outlet.
My device will not pair with B1
Verity that Bluetooth on the device is turned on. Confirm that the 01 Pair button A blinking (in pair/discovery mode).
Make sure your device is within range of B1
The B1 Pair light is solid, but I cannot connect my device.
Make sure no other devices are connected. if so, either disconnect or turn off Bluetooth on the other devices or press
and hold the B1 Pair button until it flashes, then try connecting. Try unpairing and re-pairing your device to the Bl.
Cycle B1 power by disconnecting and reconnecting the power cable.
B1 pair light is solid and my device is connected but no audio output
Confirm that the B1 output is correctly connected to your audio system. Make sure the audio source is correctly
selected on your music system (analog audio or digital optical input). Check the volume levels on your computer OS
and player app. Try unpairing and re-pairing your device to the Bl. Cycle B1 power by disconnecting and
reconnecting the power cable.
The volume output level from B1 seems low.
Check the volume levels on your computer OS and player app. Also check the volume level on your powered
speakers or stereo system.
The sound quality is poor and/or audio is cutting out.
Move B1 or your device away from cordless phones, routers, micro-wave ovens, or other Bluetooth devices. Try
moving your device closer to B1 .
Try another location.
Tu m off your device’s Wi-Fi.
Try unpairing and re-pairing your device to the B1.
Unplug power from B1 and power back on.
Check that your device’s OS is updated to the latest version.
Only one channel plays music.
Check the cables between B1 and your audio system. Check your music player app and/or OS audio controls to
ensure that the audio balance is centered.
More product information and setup tips can be found on our website: authoengineusa.com
If you have any questions or feel you may need service, contact us via email: supportigaudioengineusa.com or call
To Next Page
Loading...
Need help?
General
