EasyManuals Logo

AudioEngine B1 Manual

AudioEngine B1
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
toll-free in the United States: (877)853-9447
Break-In Period
B1 will sound great out of the box and will get better over time. However, give It 40 to 50 hours break-in time before
doing any critical listening.
Tech Staff
Supports all Bluetooth-enabled devices Integrates into any audio system with stereo audio inputs High-fidelity
Bluetooth with @ aptX @ transmission and extended range Includes built-in AKM AK4396 DAC for 24-bit upsampled
playback High-quality aluminum case with audiophile-grade connectors Analog and optical outputs
Specifications
Inputs : Bluetooth
Outputs : RCA stereo, optical (SPDIF)
Full-scale output : 2.0V RMS
Output impedance : 57 ohms
Frequency response : 10Hz – 20kHz (+/-0.5dB)
SNR (DC to 20 kHz) : >100dB
THD + N : (1 kHz FS 96 kS/s) <0.02%
Crosstalk : > -86dB
Supported Bluetooth profiles : aptX,A2DP and AVRCP
Input power : 5V, 200mA
D/A converter : AKM AK4396
Operation range : up to 100ft (30m)
Typical Product dimensions : 3.5 x 4.0×1″
Shipping weight : 1.0Ibs (0.5kg)
For additional specifications go to: audioengineusa.com
Environmental Requirements
Operating temperature 32° to 105°F (0°C to 40°C)
Storage temperature: -4° to 115°F (-20°C to 46°C)
Relative humidity: 5% to 95% non-condensing
Warranty Information
All Audioengine products have a 3-year Limited Warranty on parts and labor from date of purchase. The Limited
Warranty applies only to Audioengine products purchased in the United States. Your warranty is automatic, so there
is no need to register. For Limited Warranty coverage elsewhere, please contact your Audioengine dealer, reseller,
or distributor.
What is covered
All defective parts or faulty workmanship.
What Is not covered
The Audioengine Limited Warranty does not cover damage caused by accident misuse, abuse, neglect, excessive
moisture, lightning, power surges, other acts of nature, unauthorized product modification or repairs, or failure to
follow the instructions outlined in this guide.
What we will do
We will repair or replace any defective parts, at our option, within a reasonable amount of time and free of charge any
time during the warranty period. After service, we will be responsible for shipping the product back to you at our

Other manuals for AudioEngine B1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioEngine B1 and is the answer not in the manual?

AudioEngine B1 Specifications

General IconGeneral
Bluetooth CodecsaptX HD, aptX, AAC, SBC
Output Voltage2.0V RMS
THD+N<0.02%
Frequency Response10Hz-20kHz (+/-0.5dB)
TypeBluetooth Receiver
Bluetooth Version5.0
OutputsRCA
Signal to Noise Ratio100dB
Power Supply5V USB
Dimensions3.5 x 3.5 x 1 inches