Multiple sources and devices may be connected to the speakers at the same time and all inputs are open and active
so it’s easy to switch between your tablet, phone, TV, or any other device.
To adjust the volume, we recommend you first set a level on the HD6 and then use the volume control directly on
your device to adjust the overall level. Volume settings are flexible and there is no right or wrong so feel free to
experiment to find settings that work for you.
Optical input
The Toslink digital optical input on the HD6 rear panel can accept PCM stereo streams from any optical source, such
as a TV, computer, Apple TV, media server, DVD/Blu-ray player, CD player, or any other product with an optical
output.
The HD6 includes built-in power amplifiers so do not connect the HD6 speaker terminals directly to the speaker
outputs of a stereo receiver or amplifier.
Break-in period
Your HD6 speakers will sound great right out of the box and will sound even better over time. However, it’s best to
give them 40 to 50 hours break-in time before doing any critical listening.
Cleaning
We don’t recommend using any solvents or cleaners on Audioengine cabinets or speakers. Just wipe down with a
soft, dry cloth.
For additional setup instructions and troubleshooting tips, go to: audioengineusa.com
Audioengine Hd6 Rear Part
Audioengine Hd6 Front Part
To Next Page
Loading...