Other Features
Variable output
The HD6 includes a variable full-range preamp audio output so you can connect a subwoofer, other Audioengine
powered speakers or an Audioengine wireless adapter to stream music to other systems around your house. This
output is variable (adjustable) so the volume level of the output can be controlled from the HD6 front panel or remote
control.
Stand mounting
Threaded 1/4″x 20 brass inserts are included on the bottom of each speaker cabinet to provide the ability to attach
the speakers to floor stands. These inserts, however, are not designed to support the full weight of the speakers and
therefore should not be used with single-point wall or ceiling mounts.
Important safety note: It is the customer’s responsibility to check with the speaker stand manufacturer to determine
whether that specific stand is capable of handling the weight and proportions of these speakers in a safe and stable
manner. The customer is also responsible for proper selection of mounting hardware not included with the speaker
and for proper assembly. Audioengine disclaims any liability for the selection of suitable floor stands and/or correct
hardware between the selected stand and these speakers.
Product technical specifications
For HD6 specifications, additional setup instructions and other product information go to: audioengineusa.com
Contact support
If you have any questions, contact us via email: support@audioengineusa.com or call toll-free in the United States:
(877) 853-4447
Speaker Placement
Although your HD6 speakers are very forgiving with regards to placement, it’s true that proper speaker location can
have an impact on sound quality. There seem to be different theories on correct speaker placement but rooms and
tastes are different so it’s difficult to recommend a perfect setup. We do suggest you feel free to experiment to see
what works for you.
Asa general rule of thumb for the best soundstage and imaging, the speakers should be equidistant from side walls
and a different distance from rear walls. Tweeters should be at about eye-level in your most frequent listening
location and for the best bass response we recommend at least 6 inches of clearance between the rear of the
speakers and the wall behind them.
Here area few more suggestions, assuming you have some flexibility regarding where you place your speakers. No
need for concern if your situation and listening environment dictate the speakers’ position. Both speakers should be
equidistant from your primary listening position. Placing the speakers at least 6 feet 11.8m) apart usually provides the
best imaging.
Try to keep the speakers near the front edge of shelves or cabinets. Allow at least 6 inches of clearance between the
rear of the speakers and the wall or surface behind them.
If you need to turn the speakers on their sides, position the tweeters toward the outside.
If used on a desktop for computer speakers, it’s best if they are placed on a solid surface.
Warranty Information
All Audioengine products have a 3-year Limited Warranty on parts and labor from date of purchase.The Limited
Warranty applies only to Audioengine products purchased in the United States. Your warranty is automatic, so there
is no need to register. For Limited Warranty coverage elsewhere, please contact the Audioengine dealer, reseller, or
distributor in your country or region.
To Next Page
Loading...
Need help?
General
