AudioEngine N22 - Wired connection; USB connection; Inputs and volume settings

Using Bare Wire
CD Use your thumb and finger to unscrew the
binding post connectors on the back
of each
speaker.
@ Insert each speaker wire into the holes on the
side
of the binding post connectors, observing
proper polarity.
® Retighten the binding posts with your fingers.
® The stripped portion of the wire should be
secured firmly in each connector.
® Make sure that none of the speaker wire strands
have come in contact
with an adjoining terminal.
@ Repeat steps 1and 5 to connect speaker wires to
the amplifier.
Right Speaker
- +
•
@
@
•
@
@
Left Speaker
- +
Speaker Connections