_J!ript~~J~
, " ".':;','<':'.'i.
.,"~~,?}~
'<'
";':"
-'--J
Step
3 - Connecting the
Power
Supply
Be
sure
that the volume/power switch on the front panel
is
in the
OFF
position by rotating it counterclockwise until you hear a click.
Connect the cable with the round end from the power supply
to
the
N22
rear
panel power connector. Note that this connector
is
"keyed"
so
line up the
arrow on the cable end with the arrow on the rear panel.
Please
do
not
use
excessive force on the connector and
use
only the power supply provided
with the amplifier.
Connect the
AC
power cable from the power supply to a power outlet and
verify that the indicator light on the power supply
is
illuminated.
We
recommend using ahigh-quality surge suppressor and/or
AC
line filter on all
electronics equipment.
Step
4 - Connecting
Audio
Sources
Using the appropriate audio cable
(3.5"
mini-jack and/or
RCA
cable),
connect your audio source (computer, iPod, etc.) to the
N22
audio inputs.
One
of
each
cable type
is
included with your amplifier.
Step
5 - Operation
Turn on the
N22
volume/power knob and set the volume control
to
an
initial
setting
of
about 3 o'clock.
The
front panel power indicator will
be
illuminated.
Turn on your audio input source and adjust the volume
to
your desired
listening level.
Note that both audio inputs on the
N22
are
active
so
two
audio sources may
be
connected
to
the amplifier at the
same
time
without
the need for
an
input switch.
We
recommend using the volume control on each audio
source
to
adjust the overall system volume.
~~
audioengine N22 setup guide 6
To Next Page
Loading...
Need help?
General
Weight and Dimensions
