Need help?Do you have a question about the Audiopipe APMI-1300 and is the answer not in the manual?
General| Brand | Audiopipe |
|---|---|
| Model | APMI-1300 |
| Category | Car Amplifier |
| Language | English |
Connects speakers correctly, ensuring polarity and avoiding chassis ground connection.
Connects to the battery's positive terminal; requires an inline fuse near the battery.
Connects to the radio's remote terminal for automatic amplifier power switching.
Chassis ground terminal connection to a solid, conductive point for secure grounding.
Adjusts amplifier sensitivity to match the source unit's output voltage.
Allows bass volume adjustment from the driver's seat using the remote knob.
Connects to the radio's RCA outputs; use high-quality, short cables.
Receives signal when bridged as a slave amplifier, controlled by the master unit.
Sends a bridged signal to another amplifier in a bridging configuration.
Filters out high frequencies to match the woofer's response range.
Filters unwanted low frequencies to increase woofer power handling.
Adjusts the center frequency for bass boost, from 30Hz to 80Hz.
Adjusts the bass boost intensity from 0dB to 12dB.
Indicates when the amplifier's protection circuit is active.
Indicates the operational status of the amplifier's power supply.
To Next Page
