Do you have a question about the Audiopipe 1200W and is the answer not in the manual?
| RMS power at 4 Ohms | 2 x 125W |
|---|---|
| RMS power at 2 Ohms | 2 x 200W |
| Maximum power output | 1 x 400W |
| frequency response | 10 ~ 30kHz |
|---|---|
| signal noise ratio | 80dB |
| THD | <0.05% |
| input sensitivity level | 0.2 ~ 6V |
|---|---|
| LPF | 50 ~ 500Hz |
| HPF | 50 ~ 1.2kHz |
| dimension | 154 x 49 x 201mm |
|---|
| RMS power at 4 Ohms | 4 x 80W |
|---|---|
| RMS power at 2 Ohms | 4 x 115W |
| Maximum power output | 2 x 230W |
| frequency response | 10 ~ 30kHz |
|---|---|
| signal noise ratio | 80dB |
| THD | <0.05% |
| input sensitivity level | 0.2 ~ 6V |
|---|---|
| LPF | 50 ~ 500Hz |
| HPF | 50 ~ 1.2kHz |
| dimension | 154 x 49 x 211mm |
|---|