Audiovox MMDV2 - REMOTE CONTROL OPERATION

10
REMOTE CONTROL
Preparing the Remote Control
Inserting the Batteries
1. Open the battery compartment cover.
2. Insert two new AAA batteries. Make
sure that the positive and negative
terminals of the batteries are oriented
as indicated.
3. Close the cover
Using the Remote Control
Point the remote control towards the
player front panel IR mark (remote control
signal receiver).
Operation angle: About ± 30 degree in
each direction with respect to of the front
of the IR mark.
To prevent damage to the unit, be sure
to follow the connection diagram
(page 7).
Loading a DVD/VCD/CD Disc
1. Turn the ignition to the accessory
position.
2. Press the POWER button (1).
3. Insert the disc into the disc slot (2)
with printed side facing up.
4. The player starts playback
automatically.
Ejecting a Disc
Press (EJECT) button (3) to eject the
disc.
1 2 3