128-6743
13 of 26
-13-
Remote Sensor
The PROV710/PROV710 S /PROV710 P incorporates
an infrared sensor, which will relay signals from the
remote control to allow the unit to be controlled simply by
pointing its remote control at the remote sensor eye. The
repeater function allows control of auxiliary equipment
such as an Audiovox Video Cassette Player. The infrared
sensor can relay signals from most manufacturer’s
remote controls to its respective component connected
to the Video input. In this case you must use the remote
control supplied with the component.
Accessories
Wireless Headphones
The PROV710/PROV710 S /PROV710 P includes a built-in infrared transmitter for use with Audiovox wireless
headphones (Part Number MVIRHS). The volume can then be adjusted using the controls on each headset. The
wireless headphones must be used within a line of sight from the transmitter, as infrared transmissions, like visible
light travel only in a straight line. See the documentation accompanying your Audiovox wireless headphones.
Headset Special Features
• Automatic Level Control prevents input signal over loading.
• Uses high frequency infrared light to assure a clean signal for clear reception.
OFF AUTOON
POW ER PLAY STO P EJECT
Remote
Sensor
To Next Page
Loading...
