Audiovox VME 9122 TS Operating Instructions

The VME 9122 TS player will only recognize three folder levels and does not display folders containing only other fol-
ders. In the example above, the unit will display folders 3, 4, 6, and 8, but not 2 and 7 since they do not contain any
tracks directly. Folder 5 is not recognized at all since it is at the fourth level.
Loading an SD Card
Insert the SD card into the SD slot (21) on the front of the radio. The unit will read the files on the card automatically.
To remove the card, first press the SRC button (6) to switch to another mode and stop SD playback. Pull the SD card
out to remove it.
1. Locate the USB jack located on the MediaLink4.
2. Insert the USB device into the USB jack. The unit will read the files on the USB device automatically. To remove the
USB device, press the SRC button (6) to switch to another mode and then remove the USB device from the USB jack.
Loading a USB Device
88
Subject to technical changes

Audiovox VME 9122 TS Specifications

General

Brand	Audiovox
Model	VME 9122 TS
Category	Car Receiver
Language	English