EasyManua.ls Logo

Audioxtra AXIS AT1900BT - Song Search and Directory Navigation; RDS (Radio Data System) Operation

Audioxtra AXIS AT1900BT
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
OPERATION
Song Search
Press AS/PS button to select song search mode as below:
1) DIR Search
Press AS/PS button once. DIR SCH” is displayed. Rotate VOL knob to select the
folder, then press SEL knob to enter that folder. Rotate the VOL knob again to select
the song. Then press SEL to confirm. The unit then
searches the selected song to play.
2) NUM Search:
Press AS/PS button twice.NUM SCH is displayed. Select the song by directly
entering numeric buttons 1~6 (see the key function table).
Note: You can also rotate the VOL knob to select the song number. If the song number
was selected, the unit will wait for SEL knob for a few seconds and then search the
song, even if the SEL knob-button is not pressed.
Note: When connecting an MP3 player to unit that has a non rechargeable battery,
remove the battery from the MP3 player and then connect it to the USB interface.
Otherwise, battery damage may occur to the MP3 player.
CAUTION: When there are important files on the disc or USB, do not connect it to
the main unit for playback. This is because some operations may cause loss or
damage to important files and AXIS assumes no responsibility for this.
RDS (RADIO DATA SYSTEM) OPERATION
Alternative Frequency (AF)
Setting the AF to on/off: In AF mode of the setting menu (press and hold VOL knob).
AF On: Symbol AFappears on the display. The Program name is displayed when
receiving a RDS station. AF” symbol starts blinking if the broadcasting signal is
getting weak. The unit will automatically search for a stronger station from AF list and
switch to that better signal station. If no strong station is found in the AF list, PI SEEK
mode will be activated.
AF Off: Switch off the AF mode.
ALARM:
ALARM” will be displayed when an emergency broadcast is received. Meanwhile,
the sound output level will be automatically adjusted to the preset output level.
REG On/Off:
Setting the REG to on/off: In REG mode of the setting menu (press & hold VOL knob).
REG On:
The current listening program remains unchanged
.
REG Off:
A
llows the reception to move to a regional station.