9
OPERATION
Traffic Announcement (TA)
In TA mode of the menu, press and hold VOL knob to set the TA to on/off.
TA On: When a TA station is received, the unit will temporarily switch to radio mode
to listen to the TA station in RADIO/USB/AUX/BT mode. If the volume level was under
the TA volume it will automatically be raised to the TA volume.
TA Stop (TA interruption function):
To temporarily return to previous mode until next TA station is received.
TA Off: Turn off the TA function.
PTY Operation
In PTY mode of the menu, press and hold VOL knob. PTY SEL will be displayed. Rotate
the VOL knob to select PTY category. Once the desired PTY category is located, press
VOL knob to search.
BLUETOOTH OPERATION
PAIRING
Turn on Bluetooth search on your mobile phone for Bluetooth devices. “AX1 BT”
should appear in the list. Select “AX1 BT” and then input password “0000” if required.
When successfully paired, BT will be displayed on the LCD.
Answering / Rejecting an Incoming Call
When there is an incoming call, press key to answer. Press hang up key to
reject the call. To finish a conversation, press key to hang up call.
Making a Call
In BT mode, press key. The LCD will become blank. Here you can enter the
desired phone number and press key to dial.
(Note: Press the key to delete a wrong number.)
Transfer the Call between Mobile Phone and Unit
During a call, press AS/PS button to transfer the phone call between the mobile
phone and the unit.
Bluetooth Audio Streaming (A2DP Function)
Press SRC button to switch to BT mode. This will automatically stream audio via your
mobile device. Press key to pause/play the song. Press / button to
select next/previous song.
NOTE: On your mobile phone, it may be necessary to switch playback via
the Bluetooth stereo headset. Consult the operating manual of your mobile phone for more information.
Disconnect the Bluetooth
After the mobile phone is paired with the unit, press and hold button for 2
seconds to disconnect Bluetooth pairing.
MEMORY BACKUP
The unit is equipped with built-in memory Integrated Circuits to save user settings
such as tuner preset stations & audio control settings. Whenever power is
disconnected, these settings won’t be lost.
To Next Page
Loading...