Audison MILLENNIUM POWER 2 User Manual

MANUALE D’USO BEDIENUNGSANLEITUNG
OWNER’S MANUAL MODE D’EMPLOI
Amplificatore di potenza per auto
Auto Hi Fi Endstufen
Car power amplifier
Amplificateur de puissance pour l’automobile
Power measures taken according to audison standard 1998 edition.
- 12 VDC and 13.8 VDC.
- 1 kHz or crossover cut-off frequency.
- 0.3 % THD nominal power; 1% THD continuous power.
- Tolerance: +10 %; -5 %.
- Continuous power given by RMS Voltage measured on resistive load.
- The nominal power of the amplifier is measured upon a battery voltage of 12 Volts
with a 4 Ohms load and with all channels in function.
PRINTED IN ITALY - Code 10123901
62018 Potenza Picena (MC) Italy
Tel. 0733.870.870 • Fax 0733.870.880 • http://www.audison.com
is a division of

Audison MILLENNIUM POWER 2 Specifications

General

Brand	Audison
Model	MILLENNIUM POWER 2
Category	Car Amplifier
Language	English

Summary

Millennium Power 2 Features

Precautions for Amplifier Use

Important installation and operational guidelines to prevent damage or malfunction.

Installation Guide

Recommendations for mounting and using Audison cable products for optimal installation.

Important Warnings

Notes on input signal grounding, output connection precautions, and signal saturation.

Connection and Setup Procedures

Unit Fixing

Procedure for physically mounting the amplifier unit using screws and protective rings.

Service Connections

Diagrams and instructions for essential electrical connections like power, ground, and remote.

Tri-Mode Connection Guide

Block Diagram Explained

Technical Data Specifications

Connection Terminal Layout

Controls and Settings

Connection Configuration