Audison MILLENNIUM POWER 2XR

To Next Page

MANUALE D’USO BEDIENUNGSANLEITUNG

OWNER’S MANUAL MODE D’EMPLOI

Amplificatore di potenza per auto

Auto Hi Fi Endstufen

Car power amplifier

Amplificateur de puissance pour l’automobile

PRINTED IN ITALY - Code 10123910

62018 Potenza Picena (MC) Italy

Tel. 0733.870870 • Fax 0733.870880 • http://www.audison.com

Audison Standardmaße

(Die Leistungen sind anhand des audison Standardmaß der 1998 Edition gemessen)

- 12 VCD und 13.8 VCD;

- 1 kHz oder Crossover Frequency der Frequenzweiche;

- 0.3% THD@ Nennleistung; 1% THD @ Dauerleistung;

- Toleranz: +10%,-5%;

- Konstantleistung berechnet bei RMS Spannung,als Last reine Widerstände.

- Die Nominalleistung wird bei einer Batteriespannung von 12V gemessen,dabei wird als je ein 4

Ohm Wiederstand pro Kanal benutzt.

Standard di misura Audison

(Potenze misurate secondo lo standard audison edizione 1998)

- 12VDC e 13.8VDC;

- 1 kHz o frequenza di taglio del crossover;

- 0.3% THD @ potenza nominale; 1% THD @ potenza continua;

- Tolleranza: +10%,- 5%;

- Potenza continua misurata applicando una tensione RMS su carico resistivo;

- Potenza nominale misurata utilizzando una batteria da 12V DC con un carico di 4 Ohm e tutti

i canali in funzione.

Mesures standards Audison

(Puissances mesurées selon les standards audison,édition 1998)

- 12 VDC et 13.8 VDC;

- 1 kHz ou fréquence de coupe du filtre actif;

- 0.3% THD puissance nominale ; 1% THD @ puissance continue;

- Tolérance : +10%, -5%;

- Puissance continue donnée par la tension RMS mesurée sur charge résistant.

- La puissance nominale de l’amplificateur est mesurée à la tension de batterie de 12 Volts, avec

une charge de 4 Ohm et avec toutes les voies en fonction.

Audison measurement standards

(Power measures taken according to audison standard,1998 edition)

- 12VDC and 13.8VDC;

- 1 kHz or crossover cut-off frequency;

- 0.3% THD @ nominal power; 1% THD @ continuous power;

- Tolerance: +10%; -5%;

- Continous power given by RMS Voltage measured on resistive load;

- The nominal power of the amplifier is measured upon a battery voltage of 12 Volts with

a 4 Ohm load and with all channels in function.

is a division of

Main Page

Need help?

Do you have a question about the Audison MILLENNIUM POWER 2XR and is the answer not in the manual?

Summary

Millennium Power 2 XR Features

Precautions

Important installation requirements for proper function and temperature limits.

Installation

Mounting instructions using screws and suggestions for Audison cables.

Warnings

Critical notes on inputs, outputs, signal saturation, and listening volume.

Controls and Functions

Indicator Lights

Explains the meaning of the ON and SAFE indicator lights.

Function Selection

Describes how to select STEREO or MONO operation modes.

Inputs

Details the PRE IN Left and Right inputs for signal sources.

Crossover Filter

Explains setting the cut-off frequency for Hi-Pass or Lo-Pass filters.

Levels Control

Describes the sensitivity adjustment for output levels.

Technical Specifications

Configuration of Connecting Clamps

Output Clamps

Details connection of speakers to Left/Right or bridged mono outputs.

Power Supply Clamps

Explains connecting the amplifier's power supply from the battery.

Remote In

Describes connecting the remote turn-on signal from the head unit.