TECHNICAL SPECIFICATIONS
Inputs/Filters
Inputs Pre / Speaker
Stereo Filters Full / Hi-pass : 50 ÷5k Hz @ 12 dB/Oct.
Mono Filters Full / Hi-pass : 50 ÷5k Hz @ 12 dB/Oct.
Size
WxHxD (mm) 213 x 53.5 x 288
WxHxD (inches) 8”
7/16
x 2”
1/8
x 11”
3/8
Weight (kg) 2.4
Weight (lb) 5.29
Amplifier stage
Distortion - THD @ 1 kHz, 4 Ω, 90% Power: 0.07 %
Bandwidth @ -3 dB, 2 VRMS, 4 Ω: 15 ÷ 50k Hz
S/N ratio @ A weighted, 1 V, Max Power: 100 dB
Damping factor @ 1 kHz, 2 VRMS, 4 Ω: 200
Input sensitivity (PRE IN): 0.3 ÷ 5 VRMS
Input sensitivity (SPEAKER IN): 1 ÷ 15 VRMS
Input impedance (PRE IN): 15 kΩ
Input impedance (SPEAKER IN): 100 Ω
Load impedance (Min):
2 Ch 2 Ω
1 Ch 4 Ω
Nominal power (RMS) @12 VDC; 1% THD, 4 Ω: 45 W x 2
Output power (RMS) @14.4 VDC; 1% THD:
2 Ch @ 4 Ω 60 W x 2
2 Ch @ 2 Ω 90 W x 2
1 Ch @ 4 Ω 180 W x 1
Output Power @
4 Ω, ≤ 1% THD+N, 14.4 V: 60 W x 2 Ch
S/N ratio (ref. 1W output):
60 W Channels: 83 dBA
CEA Specifications
Power Supply
Voltage: 11÷15 VDC
Idling current: 0.4 A
Switched off: <0.01 mA
Remote IN voltage: 7÷15 VDC (1 mA)
Remote OUT voltage: 11÷15 VDC (15 mA)
Internal fuse (AFS): 15 A
Consumption @ 14.4 VDC, 2 Ω,
Max Musical Power: 11 A
To Next Page
Loading...
